You are on the right track and have picked out the best setup to add trailer lights to a hitch mounted bike rack.
For a 4-way for your 2015 Land Rover Evoque you would want the part # 119250KIT and then for a kit with lights you would want the part # 98174LED that would attach to the 4-way. For brackets then the part # BK70BB would allow you to mount the lights. view full answer...
Your concerns with the Yakima HangOut 3 Bike Rack part # Y02637 are realistic. In regards to the spoiler care should be taken to ensure that the rack is installed properly to limit the force being placed on it.
To eliminate damage to paint the rack should be only used when transporting bikes and the vehicles surface should be cleaned as well as the pads where they make contact with the vehicle. This should also be done if you pick up dirt along the trip.
To eliminate any possibility... view full answer...
The Tow Ready Wiring harness part # 118624 that you referenced has been confirmed to fit the 2012-2014 Land Rover Evoque models so it should work well for you.
Curt is not the manufacturer of this wiring harness though. They do not offer a trailer wiring solution for the 2013 model so maybe that is why they said there wasn't a fit, but the # 118624 from Tow Ready will work for you. view full answer...
For your 2015 Land Rover Evoque with 235/60-18 tires if you just want a set of chains to comply with the law I recommend Titan chains # TC2319. This is a basic set of chains with integrated tensioners for a snug fit. I have linked a video review of these chains for you.
For a set that is going to last you longer and that also has rim protection features I recommend the Pewag Snox, # PWSXV580. I have included a link to a video of these chains as well. be sure to consult the vehicle owner's... view full answer...
For your 2018 Land Rover Evoque SE Premium, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13128. The wiring harness for that vehicle is the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This wiring harness uses zero contact interface sensors to draw the signal without splicing any wires. I've attached a video of this harness installation on a different video to assist. The # C56159 you referenced... view full answer...
There is not a weight distribution system that is compatible with a Class II hitch like you currently have on your 2016 Land Rover Evoque. I recommend upgrading your trailer hitch receiver to the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13128 confirmed to fit your vehicle and compatible with a weight distribution system like the Reese Steadi-Flex Weight Distribution System w/ Sway Control # 66557 which would be a great system for you. This is an easy bolt on installation... view full answer...
I was unable to find a trunk mount bike carrier that can guarantee it would not interfere with the spoiler on your Evoque. I do have another option. Since you do have a concern about the spoiler I recommend going with a trailer hitch and a hitch mounted bike rack. The trailer hitch for your Evoque is the Curt Trailer Hitch Receiver, part # C13128. This is a Class III hitch and it has a 2 inch receiver opening. Per Curt, any non-trailer accessories used with this hitch require tie down straps... view full answer...
Yes, the trailer wiring kit part # 118624 is the correct trailer wiring 4-way you'd need for your 2015 Land Rover Evoque.
I attached an install video for this kit for you to check out as well. view full answer...
In order to obtain a 4 and 7-way trailer connector on a 2015 Land Rover Evoque you'll need to start with the T-One Vehicle Wiring Harness for Factory Tow Package part # 118624 which can then be combined with the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185. In regards to mounting, I also recommend the Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket part # C57202. view full answer...
If the crossbars of your 2015 Ford Explorer Sport are less than 3-1/2 inches wide and 1-1/4 inches tall the Rhino Rack Fairing part # RRRF3 will fit. view full answer...
The issue you are having with the lack of current on the 12 volt pin inside the 7-way on your 2007 Chevy Silverado could be attributed to either a wire short or computer issue but I have not heard of this issue specifically. I really don't have too many fixes for this either but in order to avoid having to go to the dealer you can just run your own circuit from the 12 volt pin on the 7-way to the battery with primary wire part # 10-1-1 and a circuit breaker part # 9510. If you want the... view full answer...
To be perfectly honest, some vehicles are just not ideal for trunk mounted bike racks. If the bumper's are softer than most and the bike rack gets overloaded or you hit a large bump too fast the bumper can get damaged.
Whenever possible we try to get people to use hitch mounted bike racks. This way nothing touches the vehicle and the risk of potential damage isn't there. Also, this a hitch will give you further flexibility in the future if you ever decide to do any towing or use a different... view full answer...
The Thule Force XL Cargo Box part # TH6358B would be an excellent choice to carry your 62 inch skis, boots, and other misc items.
If your vehicle doesn't have a roof rack yet you will need one first. If you have raised side rails that run from front to back on your vehicle without crossbars you would want the Thule Aeroblade Edge Rack part # TH7503-TH7503.
If you have a totally naked roof you would instead want the following part numbers # TH711420, # TH710501, # TH145012. view full answer...
The best option I can recommend for the factory crossbars on your 2015 Land Rover Evoque is the Malone DownLoader # MPG114MD with the Telos load assist # MPG351XL. This combination will also provide a load assist feature for loading/unloading the kayak. It is rated for 75 pounds. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 75227 referenced in your question is confirmed to fit your 2017 Land Rover Evoque HSE Dynamic model. I confirmed this with my contact at Draw-Tite.
When installing the hitch, you will need to trim the rear fascia and heat shield (approximately 3-7/8 inches wide by 1 inch high from the bottom of the fascia - see attached image). Because the custom hitch will use existing holes in the Land Rover's frame, you will not need to do any drilling.... view full answer...
For your tire size we have several tire chains that are confirmed to fit. If you do have limited inner tire clearance the best recommendation will be the Thule K-Summit chains par # TH02230K66 since they do not drape over the inside of the sidewall at all. These are an on-road chain though so you may need an off-road chain like the part # TH01571247 depending on how "off-road" you will be.
These chains will require 16 mm of inner clearance so that would be something you would need to consider... view full answer...
I checked with Yakima and the HangOut 2 bike rack part # Y02637 that you referenced is for sure a confirmed fit for your 2015 Land Rover Evoque. They test fit it and found it worked well so you can be confident it will work great. It might look similar to what you tried already but it is different enough to fit without hurting the spoiler. view full answer...
We don't have a confirmed fit yet for your 2017 Land Rover Evoque HSE. If they have not changed from the 2016 model, the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3035-P should fit.
For a brake controller, if you don't already have one, I recommend the Tekonsha Prodigy P3 # 90195. This is a proportional brake controller that will allow your trailer to brake with the same amount of pressure and at the same time as you hit the brakes in your HSE. It has a very... view full answer...
Go To Results